BMR Suspension ELK016, Sway Bar End Link Kit, Front, 2016 2020 Camaro

  
2016 - 2020 Chevy Camaro. ELK016 - Sway Bar End Link Kit, Front. BMR Suspension components are proudly hand Made In USA by American workers in our manufacturing facility near Tampa, Florida. We cut, bend, notch, drill, weld, mill, powder coat and package all our high quality performance components from American-made DOM and Chrome-Molly steel. The amount of force exerted on the sway bar end link is staggeringespecially if youve upgraded to an aftermarket sway bar, like BMR Suspension's SB050 or SB053. The stock end links are weak and can bend or break. BMRs ELK016 end link kit allows you to push your 2016 Camaro to the limit without fear of end link deflection. BMR manufactures the ELK016s out of CNC-machined billet aluminum hex bar stock. The right and left hand threaded ball joint-style tie rods are manufactured by Proforged and offer huge advantages over other companies end links that use rod ends. Ball joints allow for more articulation than a rod end, which is what you want when you hit the track. BMRs ball joints are greasable, which you wont find on our competitors end links. This ensures long life and flawless operation, and they make less noise than rod ends.

The ball joints attach to the sway bar with 12mm studs, while the ball joints attach to the end link tubes with ½-inch studs. This combination of components gives you a huge increase in strength over stock end links. BMR designed the ELK016 sway bar end link kit for street performance, autocross, and road race applications. BMRs heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links.

BMRs ELK016 will not deflect, giving you the full potential of the sway barno matter how hard you drive. The adjustable links allow for on-car adjustability, giving you the ability to easily correct sway bar geometry and working angles on lowered Camaros, as well as cars with adjustable sway bars. The ELK016 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMRs adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR Suspension! BMR Suspensions ELK016 sway bar end links are available in a durable black anodized finish for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.

Fits all 2016-Newer Chevrolet Camaros - On-car adjustable - Proforged ball joint-style tie rods - Greasable for long life and flawless operation - 12mm/1/2-inch studs for increased strength - 6061-T6 billet aluminum construction - Fully CNC-machined - Dramatically reduces sway bar end link deflection - Designed to withstand high compression loads - Allows for proper sway bar working angles and geometry on lowered Camaros - Allows for preloading of sway bars to fine-tune suspension setup - Designed for street performance, autocross, and road race applications - Durable black anodized finish - 1-hour installation time - Proudly designed in the U. Proudly made in the U. Please see the "Compatibility" link at the top of the listing. Proudly Made in USA By American Workers!

When BMR began back in 1998, it was difficult for performance automotive consumers to find suspension products that had an innovative design, quality construction, and an affordable price. BMR turned this market void into a business philosophy and has been serving our customer's needs ever since. BMR Suspension products are proudly made in our manufacturing facility near Tampa. We cut, bend, notch, drill, and mill our tubular components from American-made DOM and chrome-moly steel. Every product is fixture-welded to maintain consistent quality.

We bead-blast our parts and then powdercoat them on our own powdercoating line. Then we assemble and package the products in our assembly department. By manufacturing our products in house, BMR can control the quality at every stage of the manufacturing process. BMR Suspension products fit and work so well because they are street driven and track tested on BMR project vehicles. Past project cars include a 2005 Mustang drag car, a 2005 Mustang street car, a 2004 GTO, and a 1994 Camaro.

BMR's current project vehicles include a 2019 Mustang GT, a 2016 Camaro, a 2016 Challenger Scat Pack, three 2015 Mustang GTs, a 2011 Mustang GT, a 2010 Camaro, and a 1969 Camaro. As if that were not enough, BMR also has a 2009 G8 GT, a 2008 Trailblazer SS, a 2003 Mach 1 Mustang, a 2000 Grand Prix GTP, a 1998 Camaro, a 1990 Mustang LX, a 1971 Camaro, a 1970 Chevelle, a 1967 Chevelle, and a 1968 GTO. But it is more than just great vehicles-virtually every BMR employee is a racer or hot rodder, as well.

This love of racing is demonstrated everyday in BMR's customer service, design innovation, and manufacturing quality. By continuing to push the envelope in product design innovation and manufacturing technology, you can be sure that BMR Suspension will continue to offer the most innovative, quality-oriented, affordable suspension products available. BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. BMR product is designed to be used with OEM product and other BMR products.

This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. The item "BMR Suspension ELK016, Sway Bar End Link Kit, Front, 2016 2020 Camaro" is in sale since Tuesday, May 24, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Other Steering & Suspension Parts".

The seller is "bmr_suspension_inc" and is located in Seffner, Florida. This item can be shipped worldwide.

• Surface Finish: Anodized black billet aluminum
• Country of Manufacture: United States
• Country/Region of Manufacture: United States
• Manufacturer Part Number: BMR-ELK016
• Placement on Vehicle: Front
• Other Part Number: ELK016
• Brand: BMR Suspension