Crg Hindsight Lanesplit Bar End Mirror Barend Yamaha

  

CRG Hindsight Lane Splitter Billet Bar End Mirror. The Hindsight LS (Lane Split) Bar End Mirror was created by adding the folding / retractable feature to the original Hindsight.

There are two primary benefits of the retracting bar end mirroradded clearance during tight riding conditions, and reduced width for bike storage. The detent folding mechanism is calibrated to retract should the mirror contact an immovable object, thus allowing forward motion without disruption of steering control.

The pivot of the hinge features a ball / spring detent which holds the mirror bezel in the full open or full retracted positions. The pivot also features dust rings that provide for years of maintenance free operation.. As with the original Hindsight custom convex glass formed to CRG's own specification to give you the perfect balance between field of vision and image magnification.

To reduce glare, the glass has an automotive quality mirror tinting. Rubber mounting helps the glass resist vibration.

The lightweight but sturdy construction allows the Hindsight Mirror to be positioned for optimal viewing without concern of movement during high speed runs or excursions over rough roads. 6061-T6 Aluminum CNC Machined Billit Construction. Fully Moduler Assembly - Every Part Is Easily Replaceible. Extension Elbow Is Reversible For Left And Right Side Mounting. Will Fit Most 7/8'' Bars And Clip-ons.

CRG Mounting Instructions and Information Variations of bars, bar ends, bar end weights, grips & controls are infinite. The folks at CRG have designed the Hindsight Mirror to accommodate endless possibilities by creating mounting options common to most bikes. CRG makes an optional Internal Adapter. That can be used to mount the mirror to the end of the handle bar.

The optional Internal Adapter is. Included in this listing for the Blindsight Mirror.

Below is some information on the optional CRG Internal Adapter. CRG Internal Bar-End Adapter The billet Internal Bar-End Adapter Kit offers an alternative to the basic Bar-End Mirror mount. Bar-end mirrors traditionally mount into the end bore of hollow handlebars. The Internal Bar-End adapter assembly allows for mounting the Mirror in this traditional mounting fashion if for some reason you can't slide your grips inward to accommodate directly mounting the mirror to the bar.

This assembly will fit into smooth bore handlebar inside diameters as small as 12 cm. 475 and as large as 19mm.

Once installed in the handlebar, the clamp of the Mirror will interlock into the groove of the adapter cap, making for a secure, sanitary mirror mounting. The item "CRG HINDSIGHT LANESPLIT BAR END MIRROR BAREND YAMAHA" is in sale since Thursday, April 15, 2010. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Handlebars, Grips & Levers\Other Handlebars & Levers". The seller is "podiumsuperbikeinc" and is located in Novi, Michigan.

This item can be shipped worldwide.

• Part Brand: HIND SIGHT
• Manufacturer Part Number: LANE SPLIT
• Placement on Vehicle: Left
• Surface Finish: BLACK
• Warranty: Yes