Streetfighter Bar End 75mm Mirrors Oberon Performance BLACK, BMW R9T & S1000RR. Remove the original bar end and any fittings from the handlebar.
Apply thread locker to M12 adaptor and drive home using a 6mm hex drive. Extract the12mm grub screw with a 6mm hex drive key and withdraw the mirror arm from the bar end. Place the mirror bar end onto the end of the handlebar and lightly tighten the M6 or M8 bolt, depending on your adaptor kit, so that the bar end can still rotate with some form of resistance. Re-assemble the mirror arm/bezel into the mirror bar end, using any of the different mounting positions.Use the 12mm grub screw to lightly tighten the arm in place allowing a degree of rotation for alignment. Adjust the 6mm bolt in the back of the bezel to allow some form of movement with resistance. Sit on the bike and adjust the mirror bezel, arm and bar end to it's best position. Before moving on to step 9. Carefully remove the arm and bezel. Tighten the M6 bolt inside the bar end. Replace the mirror arm and bezel and insert the M12 grub screw, again allowing the arm to rotate with some resistance. Now spend as much time as you need to adjust the mirror to it's'ideal' position. Double check the position and re-adjust as necessary. When satisfied the mirror is in the correct position tighten all of the grub screws.
We suggest you apply a very small amount of thread locker to all fasteners. DO NOT use red Loctite.
Periodically recheck all fastenings for tightness. The mirror lens is first surface chrome glass and automotive standard convex (Mirror glass has a spherical radius of 1260mm) giving superb visibility and weather resistance.
Stainless steel grub screws'lock' the mirror in place ensuring the field of vision is not altered or accidently disturbed. The finish is a high quality anodise that leaves a silky sheen that will retain its looks years after life on the road. The Streetfighter bar end mirror is more than just a mirror, it is a bar end weight solution too. The combined weight of the bar end mirror easily surpasses any OEM bar end weight giving total peace of mind.
And, due to the unique Oberon Performance design of collet fittings, the mirror will feel'welded' to the handlebar as the collet will be forced to be bigger than the dimension it sits in. These are the original and best Streetfighter mirror. Now available in two sizes of mirror lens (60mm or 75mm). THIS IS FOR A PAIR (2) OF MIRRORS. This is a BLACK mirror.
This m irror is CONVEX 75mm diameter. Blue Streak Racing have many other Oberon products in stock including 75mm Covex mirrors, adjustable mirrors, bar ends indicators and gas caps.